Hawking-technology HWBA54G Bedienungsanleitung

- 5 - About the Operating Modes This device provides two main operational applications: Access Point and Bridge modes, which are mutually exclusi

- 6 - box. If you want to change the settings in order to perform more advanced configuration or even change the mode of operation, you can use the

- 7 - Info(Information) The setup home page will display the information about the current settings of this access point.

- 8 - Assoc(Associations) This page shows the MAC addresses of devices connected to this Wireless 802.11g Access Point.

- 9 - Wireless (Wireless Configuration) Here you can set/change wireless configuration including visibilit y status, PHY profiles, SSID, channel, t

- 10 - Visibility Status If you select invisible, this AP can not be detected by wireless sniffers; which means all the wireless clients can not

- 11 - Access (Access Control) This AP provides MAC Address filtering, which prevents unauthorized MAC Addresses from accessing your Wireless LAN.

- 12 - Advanced (Advanced Wireless)

- 13 - Maximum associated stations 200 Fragmentation threshold To fragment MSDU or MMPDU into small sizes of frames for increasing the reliabi

- 14 - next window for listening to broadcast and multicast messages. When the access point has buffered broadcast or multicast message for associa

CE Mark Warning This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be requ

- 15 - Security Here you can configure the security of your wireless network. Selecting different method will enable you to have different level of

- 16 - WPA Multicast Cipher TypeSelect TKIP - WPA Default WPA Pairwise Cipher Type Select TKIP - WPA Default WPA Group Key Update Interval This sho

- 17 - RADIUS server IP address Enter the RADIUS server IP. RADIUS server port number Port used for RADIUS, the number of ports must be the same as

- 18 - Enable WEP WEP (Wired Equivalent Privacy) encryption can be used to ensure the security of your wireless network. The window allows you

- 19 - IP Addr (IP Address Settings) Set the management IP for the Wireless 802.11g Access Point, the default IP address is 192.168.1.240. IP

- 20 - Admin (Administration) In this Administration page, you can Change password. The device has no password at default. It is recommended that

- 21 - To upgrade system firmware, 1. You will have to download the file to your computer. 2. Enter the file name and path in the field

- 22 - Bridge -Configuration via Web Login Open the browser, enter the local port IP address of the Device (default at 192.168.1. 241), and click “

- 23 - Info(Information) The setup home page will display the information about the current settings of this access point.

- 24 - Wireless (Wireless Configuration) Here you can set/change wireless configuration including visibilit y status, PHY profiles, SSID, channel,

Trademarks & Copyright Windows 95/98/ME and W i ndows NT/2000/XP are register ed trademarks of Microsoft Corp. All other brands and product n

- 25 - Wireless Mode Infrastructure mode: to connect to a AP Ad-hoc mode to connect to other bridge station. ireless Network Name (SSID) The S

- 26 - Security Here you can enable the WEP and set the WEP key, if you enable WEP, the client PC must also set their WEP key. Enable WEP WEP

- 27 - the access point Authentication mode. WEP key lengths Select between 64-bit and 128-bit. WEP key Enter WEP key here . Advanced (Ad

- 28 - sizes of frames for increasing the reliability of frame (The maximum value of 2346means no fragmentation is needed) transmission. The perfor

- 29 - Admin (Administration) In this Administration page, you can Change device name. This is the name that the bridge will use to identify its

- 30 - Upgrade system firmware. To upgrade system firmware, 1. You will have to download the file to your computer. 2. En

- 31 -

Table of contents INTRODUCTION...1 LED Indicators ...

Access point name ... 19 Admin (Administration) ...

- 1 - Introduction Thank you for purchasing the Hawking Technologies Hi-Speed 54G Wireless-G Access Point and Ethernet Bridge. This product is c

- 2 - LED Indicators LED Indicators on the Front Panel

- 3 - Ports on the Rear Panel Port/button Functions A 5V DC Connects to the power adapter. B LAN Connects to your LAN’s network device. C II-

- 4 - Getting Connected 1. Find a Location: choose a location to place the access point. Usually, the best place for the access point is at the